SPECIALIZED STUMPJUMPER EVO COMP ALLOY | MORNING MIST/NAVY

-6%

SPECIALIZED

STUMPJUMPER EVO COMP ALLOY | MORNING MIST/NAVY

•••••

SKU: 96323-5202

Size :

Quantity:

C$5,299.99C$4,999.99

Add to cart

1 in stock

Overview

The Stumpjumper EVO Alloy isn't a "normal" trail bike. Featuring the same all-new design as its carbon brother including an adjustable head tube angle, 150mm of performance tuned travel, and SWAT Door integration in a lightweight yet tough M5 Alloy chassi

Details

Spec’d with a no-fuss SRAM NX Eagle 12-speed drivetrain, bomber 30mm-wide alloy wheels, and plush Fox FLOAT Performance suspension, there’s no question the Stumpjumper EVO Comp Alloy is dressed to shred.

All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.
We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant.

Technical Specifications -

FRAMESET

Frame

M5 Alloy chassis and rear-end, asymmetrical design, 29" Trail Geometry with S-Sizing, SWAT™ Door integration, head tube angle adjustment, horst pivot BB adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel

Seat Binder

Alloy, 38.6mm

SWAT

SWAT™ Door integration

SUSPENSION

Rear Shock

FOX FLOAT X Performance, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSR adjustment, S1:210x50mm, S2-S6:210x55mm

Fork

FOX FLOAT 36 Rhythm, GRIP damper, two position Sweep adjustment, 15x110mm axle, 44mm offset, S1:150mm of travel, S2-S6:160mm of travel

COCKPIT

Stem

Alloy Trail Stem, 35mm bar bore

Handlebars

Specialized, 6061 alloy, 6-degree upsweep, 8-degree backsweep, 30mm rise, 780mm width

Tape

Specialized Trail Grips

Saddle

Bridge Comp, Hollow Cr-mo rails, 155/143mm

SeatPost

X-Fusion Manic, infinite adjustable, two-bolt head, bottom mount cable routing, remote SLR LE lever, 34.9, S1: 100mm, S2: 125mm, S3: 150mm, S4/S5: 175mm, S6: 190mm

BRAKES

Front Brake

4-piston caliper, hydraulic disc, 200mm

Rear Brake

SRAM Code R, 4-piston caliper, hydraulic disc, 200mm

DRIVETRAIN

Rear Derailleur

SRAM NX Eagle, 12-speed

Shift Levers

SRAM NX Eagle, trigger, 12-speed

Cassette

SRAM NX Eagle, 12-speed, 11-50t

Chain

SRAM NX Eagle, 12-speed

Crankset

SRAM NX Eagle, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm

Chainrings

Steel, 30T

Bottom Bracket

SRAM DUB, BSA 73mm, Threaded

WHEELS

Rims

Specialized 29, hookless alloy, 30mm inner width, tubeless ready

Front Hub

Alloy, sealed cartridge bearings, 15x110mm thru-axle, 28h

Rear Hub

Alloy, sealed cartridge bearings, 12x148mm thru-axle, 32h

Spokes

DT Swiss Industry

Front Tire

Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3"

Rear Tire

Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 29x2.3"

Inner Tubes

TUBES,STANDARD 48MM PV LOW LEAD 29x1.75/2.4, MAXXIS BRAND

ACCESSORIES

Pedals

PEDAL, TEST RIDE PEDALS PROVIDED BY SPECIALIZED

Geometry

	S1	S2	S3	S4	S5	S6
Crank Length	165mm	170mm	170mm	170mm	170mm	175mm
Handlebar Width	800mm	800mm	800mm	800mm	800mm	800mm
Stem Length	40mm	40mm	50mm	50mm	50mm	50mm
Saddle Width	155mm	155mm	143mm	143mm	143mm	143mm
Seatpost Length	100mm	125mm	150mm	170mm	170mm	190mm
Stack	614mm	617mm	626mm	635mm	644mm	654mm
Reach	410mm	428mm	448mm	475mm	498mm	528mm
Headtube Length	95mm	95mm	105mm	115mm	125mm	135mm
Headtube Angle	64.5°	64.5°	64.5°	64.5°	64.5°	64.5°
BB Height	335mm	340mm	340mm	340mm	340mm	340mm
BB Drop	40mm	35mm	35mm	35mm	35mm	35mm
Trail	131mm	131mm	131mm	131mm	131mm	131mm
Fork Length (full)	561mm	571mm	571mm	571mm	571mm	571mm
Fork Rake/Offset	44mm	44mm	44mm	44mm	44mm	44mm
Front Center	734mm	756mm	780mm	809mm	838mm	873mm
Chainstay Length	441mm	441mm	441mm	441mm	451mm	451mm
Wheelbase	1172mm	1195mm	1219mm	1249mm	1288mm	1322mm
Top-tube Length (horizontal)	541mm	564mm	590mm	623mm	647mm	679mm
Bike Standover Height	746mm	749mm	757mm	760mm	784mm	792mm
Seat Tube Length	385mm	385mm	405mm	425mm	445mm	465mm
Seat Tube Angle	78°	77.6°	77.2°	76.9°	77°	77°
Max Seatpost Insertion	190mm	190mm	210mm	230mm	250mm	270mm
Min Seatpost Insertion	100mm	100mm	100mm	100mm	100mm	100mm

Cart

STUMPJUMPER EVO COMP ALLOY | MORNING MIST/NAVY

FRAMESET

SUSPENSION

COCKPIT

BRAKES

DRIVETRAIN

WHEELS

ACCESSORIES

Geometry

Follow us @gericksports

Cart

Login

STUMPJUMPER EVO COMP ALLOY | MORNING MIST/NAVY

FRAMESET

SUSPENSION

COCKPIT

BRAKES

DRIVETRAIN

WHEELS

ACCESSORIES

Geometry

Follow us @gericksports